Fiberglass Color Restorer with PTEF is specifically formulated to remove oxidation and haze from colored hulls, bringing back the original color and shine. The PTEF polymers seal the restored finish to keep it looking its best, while providing unmatched protection against UV rays and a deep, long-lasting gloss. Application is simple, whether by hand or with a buffer; apply, let dry to a haze and wipe off. For best results, protect the restored finish with a coat of Premium Marine Polish with PTEF.
- Brings back original color and luster.
- Removes oxidation, chalking and fading.
- Seals surface to protect against future fading due to weathering.
- Easy to use.
- Will not scratch or harm gelcoat.
- Excellent for colored hulls.
Directions
Wash boat with a Star brite Boat Wash. Shake bottle well and use a clean, dry cloth to apply Fiberglass Color Restorer with PTEF® to surface. Rub in a firm, overlapping pattern while product is wet. Apply to small sections at a time to ensure uniform coverage. Let dry to a haze before buffing with a clean, dry cloth. Because fiberglass surfaces are porous, additional oxidation may leach out after 10-20 days, requiring a repeat application of Fiberglass Color Restorer. To preserve the newly restored finish, apply Star brite® Premium Marine Polish with PTEF® within 7 days.
SECTION 2: HAZARDS IDENTIFICATION
Classification of the Substance or Mixture
Classification (GHS-US)
Flam. Liq. 4 H227
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Skin Sens. 1 H317
Asp. Tox. 1 H304
Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US) :
GHS07 GHS08
Signal Word (GHS-US) : Danger
Hazard Statements (GHS-US) : H227 - Combustible liquid
H304 - May be fatal if swallowed and enters airways.
H315 - Causes skin irritation
H317 - May cause an allergic skin reaction
H319 - Causes serious eye irritation
Precautionary Statements (GHS-US) : P210 - Keep away from heat, hot surfaces, open flames, sparks - No smoking.
P261 - Avoid breathing mist, spray, vapors.
P264 - Wash hands, forearms, and exposed areas thoroughly after handling.
P272 - Contaminated work clothing should not be allowed out of the workplace.
P280 - Wear eye protection, protective gloves, protective clothing.
P302 P352 - IF ON SKIN: Wash with plenty of soap and water.
P305 P351 P338 - If in eyes: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P321 - Specific treatment (see Section 4).
P332 P313 - If skin irritation occurs: Get medical advice/attention.
P333 P313 - If skin irritation or rash occurs: Get medical advice/attention.
P337 P313 - If eye irritation persists: Get medical advice/attention.
P362 P364 - Take off contaminated clothing and wash it before reuse.
P370 P378 - In case of fire: Use dry chemical powder, alcohol-resistant foam, carbon
